How Do You Get Rid of Dead Algae in a Pool?
Even after you’ve treated the algae problem, dead algae in a pool can leave the water looking cloudy and uninviting. Removing dead algae is best achieved using proper tools and techniques. One of the best methods of clearing dead algae and restoring your pool’s clarity is with a robot pool cleaner. This guide will show you the best methods for removing dead algae and keeping your pool sparkling clean.
Why Dead Algae Is a Problem
Dead algae are excellent particles that can get through a pool’s filtration system, imparting a cloudy or dirty appearance to the water. Unremoved, they will settle at the bottom of the pool, creating a slippery platform and enabling new algae growth. This is why a robot pool cleaner or a pool vacuum is needed to clear them out properly.
Step 1 — Clean Your Pool with a Vacuum or Robot Pool Cleaner
A robot pool cleaner is built to deal with fine particles such as lunar algae. Top-of-the-line models such as the Beatbot AquaSense 2 Ultra and Beatbot AquaSense 2 Pro have sophisticated filtration systems that allow for the collection of minute particles.
Using a Robot Pool Cleaner to Remove Dead Algae
The first step is to run the robotic pool cleaner in the affected areas, especially along the pool bed and corners.
If you have a heavy buildup of algae, it might be worth it to use the pool vacuum robot with a fine mesh filter to catch the small stuff.
Models such as Beatbot AquaSense 2 have powerful suction and scrubbing functions to lift algae off walls and floors and dispose of it.
If you do not own a robot pool cleaner, a manual vacuum cleaner for the pool is also suitable but will require more effort and time.
Step 2 – Brush the Pool Walls and Floor
Dead algae have a tacky surface and can be challenging to remove with a vacuum alone. To loosen the algae, scrub the pool walls and floor with a stiff pool brush. Be mindful of corners and other hard-to-reach areas.
How to brush: Recommended Technique
Use a nylon or stainless steel brush (based on your pool’s surface).
Vacuum the pool walls and floor from top to bottom to push algae towards the bottom.
Once you brush, run the swimming pool robot cleaner afterward to pick up any debris that has been loosened.
Step 3: Clean Out the Skimmer and Filter
Your pool’s skimmer and filtration system are essential for getting rid of dead algae. When you use a robot pool cleaner or vacuum, empty the skimmer basket and backwash the filter afterward to help prevent clogging.
Clean the Skimmer and Filter in the Tiled Pool
Please take out the skimmer basket and rinse it well.
This will backwash the filter, dislodging any trapped algae and debris.
If you have a sand filter in your pool, consider a filter cleaner to get it working efficiently again.
Step 4: Balance Your Pool Chemistry
Poor pool chemistry may cause reoccurring algae to become the next problem after cleaning out dead algae. Test your pool water and balance the chemicals as necessary:
pH levels: 7.2 – 7.6
Chlorine levels: 1.0 – 3.0 ppm
Alkalinity: 80 – 120 ppm
Pro Tip:
If the water is still cloudy after vacuuming, you will have to shock the pool and use a flocculant to bind the remaining particles so that they can be filtered.
Step 5: Get An Acid Wash (If Needed)
If dead algae clings stubbornly to your pool’s surface (and if it’s stained), an acid wash may be required.
How to Acid Wash a Pool:
Drain the pool completely.
Prepare a diluted solution of muriatic acid (1-10).
Scrub the surface with a brush, then rinse well with clean water.
Caution: Acid washing can ruin the pool surface if you’re not careful, so consult a professional if you have any doubts.
Step 6: Prevent Future Algae Growth
To maintain an algae-free pool:
Use your robot pool cleaner at least once a week.
Balance the chlorine levels.
Occasionally clean the skimmer and filter.
Reduce debris and sun with a pool cover.
The Best Option: A Robot Pool Cleaner
A robot pool cleaner such as the Beatbot AquaSense 2 Ultra or the Beatbot AquaSense 2 Pro is made to cope with challenging debris like dead algae. Here are some features of these pool-cleaning robots:
✔️ Excellent suction power for pickup of acceptable debris
✔️ Climbing function for more thorough cleaning
✔️ COARSE MESH FILTERS designed to capture larger particles
✔️ Energy-efficient operation
If you have a large pool or issues with heavy algae, a wall-climbing pool cleaner is particularly effective. It cleans the walls and floor at the same time.
Conclusion
But how will you get this dead algae out of your pool? A robot pool cleaner such as the Beatbot AquaSense 2 Ultra or the Beatbot AquaSense 2 Pro makes the task faster and more efficient. Regularly vacuuming, brushing, and maintaining proper chemical levels allow you to have clear and algae-free water in your pool all season long. The better the investment you make in your pool cleaning robot, the better the service you will get.